High Flow Drinking Water Treatment Plant , Industrial Reverse Osmosis Water System
Drinking Water Treatment Plant Introduction ?
Reverse Osmosis Water System is raw water through precision filter, granular activated carbon filters, activated carbon filters, compression, and then through the pump pressure, the use of reverse osmosis membrane pore size 1/10000μm make a higher concentration of water into low concentration of water, while the industrial pollutants, heavy metals, bacteria, viruses and other impurities in the water mixed with a large number of full isolation, to achieve the required physical and chemical indicators for drinking and hygiene standards, outputs to clean pure water is the best choice of body replenish water quality. It is key equipment of pure water plant.
Drinking Water Treatment Plant Details
| kyro-500lph Reverse Osmosis Water System |
| 1. Capacity: 500L/H |
| 2. Rated power: 1.5KW/H |
| 3. RO System Rack Size: 1650*630*1800mm |
| 4. Desalting rate:>=97% |
| 5. Water recovery rate: 50-75% |
| 6. TDS of raw water: ≤ 2000PPM |
| 7. TDS of pure water: ≤ 60PPM |
| 8. Voltage: 110V / 220V / 380V, 50Hz / 60Hz, single phase / 3phase |
Drinking Water Treatment Plant Component
There are several kinds of consumables you need to replace regularly.
a. Quartz sand: replaced about every 15 months. 50kg/bag
b. Activated carbon: replaced about every 15 months. 25kg/bag
c. Resin: replaced about every 15 months. 25L/bag
d. PP Filter cartridge: replaced about every 1 month
Drinking Water Treatment Plant Optional Components
A. Regulating wheels
B. PC Touch Screen
C. Two-stage RO system
D. PH adjustment
E. CIP cleaning system
F. Auto or manual control valve
G. U-PVC or stainless steel pipe
H. UV sterilizer/Ozone Generator
I. Dosing system(anti-scale)/Water Softener
J. PE or stainless steel raw/pure water tank
K. FRP or stainless steel pre-treatment tank
Drinking Water Treatment Plant Details
